NMFC changes in 2026
What is in force now, what was proposed and turned down, and what is still open for comment. The standard density scale itself has not moved since July 2025.
The density scale has not changed
Docket 2025-1 replaced the 11-step density scale with 13 steps on July 19, 2025, adding class 55 for freight from 35 to under 50 pcf and class 50 for freight at 50 pcf and up. Neither 2026 docket touches those steps. What the 2026 dockets do is move more commodity groups onto the same scale, so more freight gets classed by density than before and fewer items carry a class of their own.
That means the arithmetic has not changed. The freight class calculatoruses the same 13 steps it did a year ago, and the number it gives is only as good as the dimensions and weight you put in. The methodology page lists the steps with their source.
Docket 2026-1: in force since May 23, 2026
Docket 2026-1 was issued on February 6, 2026 and carried 44 subjects. The Freight Classification Development Council met on March 10 in Savannah, published its decisions in Disposition Bulletin 1373 on March 20, and the approved amendments were issued in a supplement on April 24 with an effective date of May 23, 2026. ClassIT+ was updated the same day.
Most of the work was consolidation: similar commodities folded into single items, legacy items cancelled, and flags added to mark freight with handling, stowability or liability concerns. If you ship something whose item number disappeared, the class you have been quoting may not exist any more, and the carrier will rate whatever the current item says.
The mixed shipment rule stayed as it was
Subject 1 of Docket 2026-1 proposed rewriting Item 640, the rule that governs mixed shipments. It would have classed a mixed handling unit under 128 cubic feet, with length and width both under 96 inches, by its own calculated density on the 13-step scale, and it would have let a shipper hold that density by listing the dimensions of each handling unit on the bill of lading.
The council disapproved it. A fair amount of writing from spring 2026 still describes the proposal as though it went through. It did not. The existing Item 640 still applies: a pallet or package carrying differently classed articles is rated at the highest class on it, unless the bill of lading and shipping order itemise each article with its weight, carry the notation the rule requires, and the unit has a packing slip listing what is on it.
In practice that is the difference between paying class 70 and paying class 300 on the same pallet. If you build mixed pallets, itemise them. Separate handling units with separate classes are a different case, and the calculator shows a class for every line so each one can go on the bill of lading on its own row.
Docket 2026-2: open for comment until September 23, 2026
Docket 2026-2 was issued on August 28, 2026 with around 33 proposals, again aimed at simplifying and consolidating items. The groups in it include glassware, building woodwork, ladders, fish, fencing, earthen conduits, farm equipment, shades and blinds, and vehicle parts.
Comments close at 5:00 pm Eastern on September 23, 2026, and the public meeting is on September 29 in Long Beach, California. Comments go to the council at [email protected] with the docket and subject number on them. Anyone can file one, and a shipper who actually moves the commodity in question is the person whose numbers the council does not otherwise have.
Nothing in this docket changes the 13 density steps. If it is adopted, the effect on you is that more of what you ship gets classed the way the calculator already works it out.
What to do about your paperwork
- Put the dimensions and the weight of each handling unit on the bill of lading. It is what a carrier checks a reweigh against, and it is the only record you have if the class comes back different.
- Itemise mixed pallets, or expect the highest class on the pallet. Under the current Item 640 there is no middle option.
- Re-check anything you ship regularly after each effective date. An item that was cancelled or merged does not announce itself on your side of the transaction. It shows up on the invoice.
- Keep the density estimate and the NMFC item separate in your head. Density gets you a class to work with. The item for your commodity is what the carrier bills on.
Dates
- July 19, 2025
- Docket 2025-1 takes effect. The standard density scale goes from 11 steps to 13, adding class 55 and class 50.
- February 6, 2026
- Docket 2026-1 is issued, with 44 subjects.
- March 10, 2026
- Public meeting on Docket 2026-1, Savannah, Georgia.
- March 20, 2026
- Disposition Bulletin 1373 records what the council approved, modified, withdrew and turned down.
- April 24, 2026
- The supplement carrying the approved amendments is issued.
- May 23, 2026
- Docket 2026-1 takes effect. ClassIT+ is updated the same day.
- August 28, 2026
- Docket 2026-2 is issued, with around 33 proposals.
- September 23, 2026
- Comments on Docket 2026-2 close at 5:00 pm Eastern.
- September 29, 2026
- Public meeting on Docket 2026-2, Long Beach, California.
Sources
Dates and dispositions here come from NMFTA's own documents:Docket 2026-1,Disposition Bulletin 1373, the notice opening comment on Docket 2026-2, and the public docket files. This page is read against those documents again whenever a docket is issued or a disposition is published, and the date at the top says when that last happened. Sonnis is not NMFTA and has no part in the classification process.
Shipping LTL every week?
We are building a version that remembers your shippers, consignees and products, so the next shipment takes a minute instead of a form. It is not built yet. Leave your email and we will write when it is ready and ask you three questions.